Setup and Operation
1. Place the massager on the floor or a support (like chair, sofa, etc)
Please use in the manner shown below
1.站立
按摩脚底
Exercised
whole body
*Note, if use the massager by standing posture, the user must stand on the masssager
with both feet and weigh no more than 200 pounds.
2. Connect the adapter cable to the corresponding port on the foot massager.
3. Plug the home adapter into electrical outlet ( the adapter is safe to use with
both 110-120V & 220-240V )
4. Turn on the massage device through operating wireless remote controller or control
panel ( instructions on page 7 ).
• This device will switch off automatically after 15 minutes timer run out.
• Do not setup or use the device in a bathroom or similary wet / damp areas.
Before plug ,please check and make sure the power cord is undamaged.
•
Do not use the wet hand to plug in or pull out the adapter in order to avoid
•
any electric shock
.
When moving the product, please don't pull the power cord or drag the product
•
directly to avoid any damaged caused.
Please don't let children and pets play the products for preventing any accident
•
happened.
Do not use this product in damp environment to avoid electric shock.
•
2.坐着
脚底按摩
foot
3.按摩腿
calf or thigh
3
4.按摩背部
back
Need help?
Do you have a question about the SL-591 and is the answer not in the manual?