Setup And Operation - Snailax SL-632 Use & Care Manual

Setup and Operation

1. Connect the adapter cable to the cable on the cushion.
2. Plug the home adapter into an outlet or the car adapter into your car's power
receptacle.
3. Turn on the massager and select your desired settings through below controller.
4. Additional dust-proof sleeve is provided to cover the massage heads for
softening purpose when needed.
There are two modes:
Auto Mode: This is the default mode, once the massager is in the ON position, the
massage heads will rotate and change direction every minute until it auto shuts off.
Manual Mode: Once the massager is in the ON position, if the rotation button is
pressed, the massage heads will continue to rotate in the same direction until it
auto shuts off. You can press the direction button to switch the rotation in the
other direction as you need it.
Power
(on/off)
Heat
(on/off)
Rotation/
Reverse Rotation
3