Controller Instructions - Snailax SL-591 Use & Care Manual

Controller Instructions

Option 1: Use wireless remote controller
Power Button
Mode Button
Power Button:
Mode Button:
Intensity Button:
Heat Button:
Option 2: Use control panel on the product
Power Button
Power Button:
Heat button:
Press to turn on /off heating function.
Buzzer: When pressing Mode button, the buzzer sounds "DI"/"DI DI"/"DI DI DI", it indicates
mode I/mode II/mode III respectively; when pressing Heat button, it respectively indicates low/
medium/high level of heating; when pressing intensity button, it indicates low/medium/high
massage intensity
After use
•
Turn of f the massager by pressing the power button on the remote controller or control panel.
• Remove the plug from the power supply socket.
Caution
Please don't put water or other liquid on the control panel.
Please don't press the button too long time at a time to avoid the program confused.
When power failure happens during massage, please turn off the power and
pull out of the plug from socket.
Please do not let your hand or fingers close to and inserted into the gap of products
for preventing any injuries caused.
Please do not let children and pets play the product for preventing any accident happened.
Press to turn on the device, it starts to work at Mode I, high massage
intensity, and high level of heating. Press again to turn off the device.
Press to cycle Mode I--> II--> III--> II--> I--> II--> III...
Press to cycle high-->medium-->low-->medium-->high... level of
massage intensity
Press to cycle high/low/off settings of Heating function. And the
corresponding indicator will be red/purple/green
1st press: turn on the device, it starts to work at Mode I (always on mode I),
high intensity, and high level of heating.
2nd press: shift to medium intensity.
3rd Press: shift to low massage intensity.
4th press: turn off the device.
Heat Button
5
Heat Button
Intensity Button