Do you have a question about the SL-593G and is the answer not in the manual?
Questions and answers
Mohammad Dar
May 13, 2025
How I can activate my massager, power is connected but massager armes are not working.
1 comments:
Mr. Anderson
May 21, 2025
To activate the Snailax SL-593G massager:
1. Press the Power button once to turn it on. The indicator will turn Yellow, and the massager starts in auto mode. 2. If the arms are not working, try pressing the Power button again to switch modes: - 2nd press: clockwise shiatsu (Green indicator) - 3rd press: counterclockwise shiatsu (Red indicator) 3. Ensure the speed is set using the Speed button: - Low (Green), Medium (Yellow), High (Red) 4. Make sure the Heat button is not interfering; press it to adjust heat levels. 5. If still not working, turn off the device, unplug it, wait a few seconds, plug it back in, and try again.
Avoid pressing buttons too long, as it may confuse the program.
Page 1
Use & care manual SHIATSU FOOT MASSAGER WITH HEAT SL-593G...
Page 2
Instruc�on Thank you for purchasing Shiatsu foot massager with heat by Snailax Corpora�on. With normal care and proper treatment, it will provide years of reliable service. Please read all instruc�ons carefully before using this product. Please retain this manual for future reference.
Page 3
Setup and Opera�on 1. Please put the product on the flat floor. 2. Connect the adapter cable to the corresponding port on the foot massager. 3. Plug the home adapter into electrical outlet ( the adapter is safe to use with both 110-120V &...
Page 4
Safety Instruc�ons Please read the following instruc�ons carefully before pu�ng your massage device into use to ensure trouble-free opera�on and op�mum efficiency. Please retain these instruc�ons for further reference! • The device conforms to recognized technical principles and the latest safety regula�ons. •...
Page 5
Controller Instruc�ons • Please choose a chair with desired height and be seated, then put your feet on the product ( see right picture). Operate below control panel to get foot massages. Power Bu�on 1st Press to turn on the massager, the indicator turns Yellow. The massager ac�vate the auto mode;...
Page 6
Cleaning & Maintenance Instruc�ons - Before cleanig,make sure the power supply is turned off and the plug has been pulled out from the socket. - It is forbidden to dip the whole product in water or other liquid when cleaning. - Use a so�...
Page 7
(support@snailax.com), our staff will contact you within 24 hours. 90-Day Money Back Guarantee for quality related issue Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use. 24-Month Warranty for quality related issue If the product break down within 24 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.
Page 8
2750 Carpenter Road, Suite 1 B, Ann Arbor, 48108 Tel.+1.734.709.6982 support@snailax.com www.snailax.com...
Need help?
Do you have a question about the SL-593G and is the answer not in the manual?
Questions and answers
How I can activate my massager, power is connected but massager armes are not working.
To activate the Snailax SL-593G massager:
1. Press the Power button once to turn it on. The indicator will turn Yellow, and the massager starts in auto mode.
2. If the arms are not working, try pressing the Power button again to switch modes:
- 2nd press: clockwise shiatsu (Green indicator)
- 3rd press: counterclockwise shiatsu (Red indicator)
3. Ensure the speed is set using the Speed button:
- Low (Green), Medium (Yellow), High (Red)
4. Make sure the Heat button is not interfering; press it to adjust heat levels.
5. If still not working, turn off the device, unplug it, wait a few seconds, plug it back in, and try again.
Avoid pressing buttons too long, as it may confuse the program.
This answer is automatically generated