Table of Contents
Advertisement
Setup and Operation
1.Place the massager to a chair or other support.
2. Connect the adapter cable to the cable on the cushion.
3. Plug the home adapter into an outlet or the car adapter into your
car's power receptacle.
4. a) Press the power button to turn on the massager and activate
shiatsu with Heat, Shiatsu rotation direactions be automatically
shifted per minute for a thorogh massage.
b) Press the button again to turn off the heat, then shiatsu works
without heat.
c) Press and hold on 3 seconds to turn off the massager.
Note: It can not be only heat without shiatsu.
5. You may choose a softer or more intense massage by putting down
or opening the flap.
• The massager willl automatically switch off after 15 minutes
timer run out.
• Remove the adapter from the outlet when not in use.
• Do not setup or use the massager in a bathroom or similary
wet / damp areas.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the SL-618N and is the answer not in the manual?
Questions and answers