Technical Data; Mains Power Connection - Pentair JUNG PUMPEN EASYLOGO 2-00 E Instruction Manual

TECHNICAL DATA

Operating voltage
Power consumption
Switching capacity
Minimum load per socket (built-in level control monitoring)
Control voltage
Potential-free contact
Terminals
One-site pre-fuse
On-site residual current circuit breaker
Housing protection category
Housing dimensions in mm
Weight
Ambient temperature
Air humidity

Mains power connection

Plug the control unit into a properly installed socket only.
EMC
When our standard submersible pumps and accessories are installed as specified and used as intended, the control units meet the pro-
tective requirements of the EMC Directive 2014/30/EC, and are suitable for domestic and commercial use when connected to the public
power supply network. If connected to an industrial power supply network within an industrial facility, where the power supply is provided
by an in-house high-voltage transformer, there may be insufficient immunity to interference.
Transport/storage
The control unit must be protected from the weather and stored in a dry place.
B 55002.11-2022.01 EASYLOGO 2-00 E
1/N/PE x 230V, 50 Hz
max. 2 W
max. 2 x 800 W AC3 230 V
320 W
230 VAC / 12VDC
max. 5A / 250 VAC
up to 2.5 mm²
16A
≤ 30mA
IP 54
Height 152, width 202, depth 90
approx. 1.3 kg
-20° to 50°C
0 to 90% rH, with no condensation
ENGLISH
13