Page 4
INSTRUCTIONS Be sure that an operating pressure gauge is located in discharge line. Use heavy duty, liquid CAUTION: Positive Displacement Pumps must filled, pulsation free pressure gauge. have a proper size and operable type of pressure 6. Make sure all valves, including spray gun or regulating valve or pressure relief valve piped into nozzles, are open in discharge line.
Page 5
NOTE – Drain oil from crankcase after first 30 hours of The rod seal assembly contains two seals, two oil operation. Refill with proper oil as mentioned above. seals with lips facing power end. The fluid end must Change oil every 300 hours thereafter. Check oil levels be removed before the oil seal can be replaced.
Page 20
(f) if unit is used for purposes other than for what it is designed and manufactured; (g) to any unit that has been repaired or altered by anyone other than Pentair Myers or an authorized Pentair Myers service provider;...
Need help?
Do you have a question about the Myers CMP Series and is the answer not in the manual?
Questions and answers