Installing Your Oven Accessories - AEG BEK722910M User Manual

INSTALLING YOUR OVEN ACCESSORIES

Installing the side racks
• The side racks attach to each side of your oven .
There is a left hand and right hand version
(see image below for details) .
• Insert the rear peg into the rear access hole
provided, ensuring that the peg is fully inserted .
• Then locate the front peg into the front access hole
and push in firmly .
Front Peg
Left hand side rack
Front peg
Fitting the shelves and grill dish carrier
between the side rack wires
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out .
The grill dish carrier is designed the same way and can
slot straight into the side racks .
To fit a shelf or grill dish carrier to side racks:
1 . Locate the rear edge of the shelf/carrier
in between guide rails of the side rack -
see diagram .
2 . Ensure the same rail positions on both
sides of the oven are being engaged .
With the front edge raised, begin to
slide the shelf into the oven .
3 . Once the detents have passed the front
edge of the side rack, the shelf can
be pushed completely in . When fully
inserted the shelf/carrier should not
interfere with the closed oven door .
Left Hand
Rear Peg
Side Rack
Rear peg
Positioning the dishes on the grill dish
carrier
17