Specials; Clock Functions - AEG BEK722910M User Manual

SPECIALS

Heating Function Application
This function can be used
for defrosting frozen foods,
such as vegetables and
Defrost
fruits. The defrosting time
depends on the amount
and size of the frozen food.
Keep Warm To keep food warm.
To preheat plates for
Plate Warming
serving.
To preserve fruits and
Preserving vegetables in sterilized
cans and jars
To dry sliced fruit (e.g.
apples, plums, peaches)
Drying and vegetables (e.g.
tomatoes, zucchini,
mushrooms).
Dough For controlled rising of
Proving yeast dough before baking.
To prepare tender,
Slow Cooking
succulent roasts.
Bread Baking To bake bread.
Activating a heating function
1 . Activate the appliance
2 . Select the menu: Heating Functions
3 . Press to confirm
4 . Select a heating function .
5 . Press to confirm.
6 . Set the temperature .
7 . Press to confirm.
Heat-up indicator
When you activate a heating function, the bar on the
display comes on . The bar shows that the temperature
increases . When temperature is reached the buzzer
sounds 3 times and the bar flashes and then disappears
Activating a fast heat up
This function decreases the heat-up time .
Do not put food in the oven when
the Fast heat up function operates.
To activate / deactivate the function,
hold for 3 seconds . The heat-up indicator
alternates . (This function is enabled by default)
Residual heat
When you deactivate the appliance, the display
shows the residual heat . You can use the heat to
keep the food warm .

CLOCK FUNCTIONS

Clock Function Application
To set a countdown
(max. 2 h 30 min).
This function has no
effect on the operation
of the appliance. You can
Minute
also activate it when the
Minder
appliance is deactivated.
Use
function. Press
to set the minutes and
To set the length of a
Duration cooking operation (max.
23 h 59 min).
To set the switch-off time
End Time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the time starts to
count down after 5 seconds .
If you use the clock functions: Duration, End
Time, the appliance deactivates the heating
elements after 90 % of the set time . The appliance uses
the residual heat to continue the cooking process until
the time ends (3 - 20 minutes) .
Setting the clock functions
Before you use the functions: Duration, End Time,
you must set a heating function and temperature
first. The appliance deactivates automatically. You can
use the functions: Duration and End Time at the same
time if you want to automatically activate and
deactivate the appliance on a given time later . The
functions: Duration and End Time do not work when
you use the core temperature sensor .
1 . Set a heating function .
2 . Press again and again until the display shows the
necessary clock function and the related symbol .
3 . Press or to set the necessary time .
4 . Press to confirm.
When the time ends, an acoustic signal sounds .
The appliance deactivates .
The display shows a message .
5 . Press any symbol to stop the signal .
13
to activate the
or
to start