Electrical Data - Carrier AquaForce PUREtec 30XW-VZE 451 Installation, Operation And Maintenance Instructions

Water-cooled and heat pump variable speed liquid chillers greenspeed with r1234ze(e) or optionally with r515b refrigerant

Hide thumbs

Table Of Contents

Table of Contents

4 - PHYSICAL AND ELECTRICAL DATA

4.2 - Electrical data

30XW-VZE /30XWHVZE

Power circuit

Nominal power supply

Voltage range

Control circuit

(1)

Start-up current

(2)

Maximum power factor

Cosine phi

(3)

Harmonic distortion rate

(4)

Maximum power input

Circuit A

Circuit B

Eurovent current draw*

Circuit A

Circuit B

(4)

Maximum current draw (Un)

Circuit A

Circuit B

Maximum current draw (Un -10%)

Circuit A

Circuit B

Maximum power input with option 150B

Circuit A

Circuit B

Maximum current draw (Un) with option

(4)

150B

Circuit A

Circuit B

(3)

Dissipated power

(1) Instantaneous start-up current.

(2) May vary, based on the short-circuit current/max. current draw ratio of the system transformer. Values obtained at operation with maximum unit power input.

(3) Values obtained at operation with maximum unit power input.

(4) Values obtained at operation with maximum unit power input. Values given on the unit name plate.

Eurovent unit operating conditions: evaporator entering/leaving water temperature = 12°C/7°C, condenser entering/leaving water temperature = 30°C/35°C. Gross

performances, not in accordance with EN14511-3:2013. These performances do not take into account the correction for the proportional heating capacity and power

input generated by the water pump to overcome the internal pressure drop in the heat exchanger.

451

V-ph-Hz

0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93 0,91-0,93

> 0,98

35-45

135

129

210

(3)

220

(4)