Installation Information - Garmin GPSMAP 196 Pilot's Manual

Installation Information

This section of the Appendix provides information on connecting the
GPSMAP 196 to auxiliary devices and removing the antenna.
Connecting the Power/Data Cable
The power/data cable connects the GPSMAP 196 to an 8–35 VDC
system and provides interface capabilities for connecting external
devices. The color code in the diagram below and to the right
indicates the appropriate harness connections. Replacement fuse is a
3AG - 2.0 Amp fuse.
Data In
White
Power
Red
Unit View
GPSMAP 196 Pilot's Guide
Ground
Black
Data Out
Brown
A
PPENDIX
Data In
White
Ground
Black
Cable View
Red: Power
Black: Ground
Brown: Data Out
White: Data In
> I I
NSTALLATION NFORMATION
Power
Red
Data Out
Brown
8-35 volts DC
Autopilot/
NMEA Device
GBR 21/23
Beacon
Receiver
101