Active Route Page - Garmin GPSMAP 196 Pilot's Manual

A M P > A
VIATION ODE AGES CTIVE
Target Altitude—enter the altitude you want to be at when you
reach your target location. Select Above Waypoint to use field
elevation for airports in the Jeppesen database or Above MSL to
specify an exact MSL altitude target.
By—defines the target location with settings of distance Before or
After a reference waypoint (the final destination airport). To set a
target location at a reference waypoint, enter a distance of zero.
VNAV Waypoint—allows you to select any waypoint along the
currently active route (or Goto) as your reference waypoint. The
reference waypoint defines the target location.
VNAV Profile—allows you to select the descent rate.
VNAV Messages—enables and disables VNAV alert messages.
40
R P
OUTE AGE

Active Route Page

Whenever you start a route (flight plan) or initiate a Goto while in
Aviation or Water Mode, the Active Route Page shows each point
(waypoint or map item) of the active route, with the point name,
Course, Distance, and several other fields of information. The
current destination point, the active point, is marked with an arrow.
As you navigate a route, the list automatically updates to indicate the
active point first. The Active Route and Route Review Pages share
many of the same features and options.
Press PAGE repeatedly to open the Active Route Page.
Active Route Page
NOTE: If you have created a route (Flight Plan) with a
Jeppesen point that is no longer current after you perform an
update to your Jeppesen Database, the route is locked. You need
to create a new route with current Jeppesen Database points.
GPSMAP 196 Pilot's Guide