Data Field Options - Garmin GPSMAP 196 Pilot's Manual

A > D F O
PPENDIX ATA IELD PTIONS

Data Field Options

The following list provides a brief description of each data field
option. Some of these options are supported only by devices
interfaced to your GPSMAP 196.
Accuracy—the current accuracy of your GPS determined location.
Altitude—the height above mean sea level (MSL).
Battery Timer—the time remaining on the battery before it is fully discharged.
Bearing—the compass direction from your current location to a destination.
Course—the your path of travel from your starting location to a destination.
Course to Steer—the recommended direction to steer in order to reduce cross-
track error and return to the course line. Showed as Steer.
Cross Track—the distance you are off your course in either direction, left or
right.
Dest Wpt—see Waypoint (Destination).
Distance (Destination)—the entire distance, from beginning to end, of a route.
Distance (Next)—the distance to the next point on a route.
ETA (Destination)—Estimated Time of Arrival. The estimated time you will
reach your destination.
112
ETA (Next)—Estimated Time of Arrival. The estimated time you will reach the
next point on your route.
ETE (Destination)—Estimated Time Enroute. The estimated time required to
reach your destination.
ETE (Next)—Estimated Time Enroute. The estimated time required to reach
the next point on your route.
Location (Lat/Lon)—your current location as latitude/longitude coordinates.
Location (Selected)—your current location described in the selected units of
measure (other than lat/lon).
Max Speed—the maximum speed the unit has moved since last reset.
Mov Avg Spd—see Trip Avg. Speed (Moving).
Move Timer—see Trip Timer (Moving).
Next Wpt—see Waypoint (Next).
Odometer—the total distance traveled since the Odometer was reset.
Pointer—the arrow indicating the direction to travel to the next point on a
route.
GPSMAP 196 Pilot's Guide