What To Do If - AEG BP7614000 User Manual

26

What to do if...

First glass panel has a black frame, the second a small dot on a upper right corner and the
third one has no marking. Refer to the illustration.
When you assemble the panel with the black frame, make sure that the screen-printing
(you can feel a roughness) on this panel faces the oven.
Make sure that you put the stop rubber as in the
illustration.
WHAT TO DO IF...
WARNING!
Refer to "Safety information" chapter.
Problem
The appliance does not heat up
Possible cause
The appliance is deactivated
The time of day is not set.
The necessary settings are not
set
The automatic switch-off is ac-
tivated
The fuse is released
The "Demo" function is on.
Solution
Activate the appliance
Set the clock. Refer to "First
setting the time of day"
Make sure, the settings are cor-
rect
Refer to „Automatic switch-
off"
Make sure, if the fuse is the
cause for the malfunction. If
the fuse releases again and
again, refer to an authorized
electrician
Deactivate the "Demo" func-
tion.
1. Deactivate the appliance.
2.
Touch and hold
an acoustic signal sounds
(for minimum 5 seconds).
3.
Touch and hold
at the same time for 2
seconds until an acoustic
signal sounds.
until
and