Adjustment Conditions (5)
In standby mode (but not in energy saver mode):
The adjustment is done once, depending on:
» Time since the previous line position adjustment
» Temperature change since the previous line position
adjustment
» Number of prints since the previous line position
adjustment
The machine checks the above conditions in
standby mode every 10 minutes (SP 3512 002).
Then, line position adjustment is done if two of the
conditions occurs.
» Time and number of prints, or temperature and number
of prints
New PCDU
When the machine detects a new PCDU, line
position adjustment is automatically done twice.
Slide 132
No additional notes
132
Di-C1.5 Training