Configure Your Device; Acquire Satellite Signals - Garmin Forerunner 410 Owner's Manual

Configure Your Device

The first time you use your device,
follow the on-screen instructions
to learn how to use the bezel, set
your user profile, and configure the
device.
If you are using an ANT+ heart
rate monitor, select
configuration to allow the heart
rate monitor to pair (connect) with
your device. See
information.
The device uses your user profile to
calculate accurate workout data.

Acquire Satellite Signals

To set the correct time of day and
begin using the device, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
Forerunner 410 Owner's Manual
Yes during the
page 6 for more
noTe: To turn off the GPS receiver
and use the device indoors, see
page 19.
noTe: You cannot acquire satellites
in power save mode. To exit power
save mode, press
1. Go outdoors to an open area. For
the best reception, make sure the
antenna of the device is oriented
toward the sky.
2. Touch and hold
training mode.
Getting Started
enter or quit.
Antenna
location
training
to enter
5