Figure 7 - Flame Simulator Kit; Figure 8 - Fls-Fsim-Uv-Ir Flame Simulator Front View - GasTech F-GUARD UVIR User Manual

1.5.5 Flame Simulator
The F-Guard-UV-IR (F) may be tested using the FLS-
FSIM-UV-IR-KIT. The F-Guard flame simulator
family provides a fast and convenient means of
periodically testing the detector and control system
end-to-end. Maintenance costs can be reduced as
the detectors can be tested in situ without needing
a hot work permit.
F-Guard Flame Simulators emit UV and IR radiation
which simulates a fire to the detectors. The
simulators are lightweight, easy to use, with testing
distances of up to 21.3 ft. (6.5m) and capable of
more than 100 activations between battery
charging. F-Guard Flame Simulators are ATEX
approved for use in hazardous Zone 1, Zone 2, Zone
11, Zone 22 areas.
Each simulator kit contains a carrying case,
simulator, carrying strap, battery charger, user
manual, Allen key and a tool for removing the
simulator rear cover.
For more information & Technical support:
F-Guard UV-IR User Manual
F
info@gastech.com and support@fg-detection.com
Doc. No. F110V0020.06
7 - F S
IGURE LAME IMULATOR
F 8 - FLS-FSIM-UV-IR F
IGURE
V
IEW
K
IT
S F
LAME IMULATOR RONT
6