Introduction; Packing; Specifications; Safety Information - Labnet Pro 30 Instruction Manual

1.0 Introduction

Congratulations on purchasing your Labnet Pro 30 Laboratory Reciprocal Shaker. This shaker features
a left to right linear action to provide gentle to vigorous shaking. Four platform configurations make this
model valuable for a variety of applications.

2.0 Packing

The Labnet Pro 30 Laboratory Reciprocal Shaker includes the following components:
Pro 30 Reciprocal Shaker

Instruction Manual

NOTE: Platform needs to be purchased separately.

3 .0 Specifications

Electric Power Supply
Fuse
Speed
Stroke Length
Timer
Load
Dimensions (W x D x H)
Platform Dimensions (W x D)
Weight
Operating Conditions

4.0 Safety Information

Do not use the shaker near water sources. Be sure that water doesn't get on the device, especially

during the cleaning procedures.
Do not expose the shaker to aggressive vapors (e.g. organic solvents).

Do not insert objects into the shaker (such as screw driver or metal rods).

Never operate the shaker without platform securely attached.

Hazardous samples should be shaken only in appropriate containment vessels.

NOTE: If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Do not shake flammable or explosive samples.
115V ± 10%, 50/60Hz, 0.2A or 230V ± 10%, 50/60Hz, 0.1A
230V includes EU and UK power cords
2 x 0.5A (115V); 2 x 0.25A (230V)
From 5 to 150 strokes per minute
30 mm
20 to 120 minutes, in 10 minute steps, HOLD function
11 lbs. (5 kg) including platform
10 x 12.6 x 6.3 in. (25.5 x 32 x 16 cm)
12 x 12 in. (30 x 30 cm)
15 lbs. (6.6 kg)
4°C to 70°C, up to 85% RH, non-condensing
Instruction Manual | 1