Introduction; Specifications; Unpacking - Labnet I5311-DS Instruction Manual

INTRODUCTION

This manual covers the specifications, operation and use of the Labnet I-5311-DS shaking incuba-
tor and its accessories. Please pay special attention to the Safety Precautions section in this
manual.
The I-5311-DS shaking incubator from Labnet International provides an extremely stable tempera-
ture environment, and an aggressive shaking motion for the mixing of materials for cell culture
growth at ambient and above ambient temperatures.
The I-5311-DS shaking incubator uses microprocessor controls and mechanical convection to
maintain a stable temperature environment and to achieve fast chamber temperature recovery
after a door opening. The incubator interior is constructed from stainless steel for corrosion resis-
tance and easy clean-up of accidental spills. All incubator doors have an integral glass window and
the incubator has a light to allow observation of samples without opening the door. Each door is
fully thermal gasketed.
The I-5311-DS shaking incubator comes with one removable full shelf and four large, rubber pad-
ded adjustable feet for leveling the unit. Additional half and full shelves may be purchased. The I-
5311-DS shaking mechanism supports a wide range of optional rack and flask platforms which are
user changeable.

SPECIFICATIONS

Chamber temperature range
Accuracy / Uniformity @37°C
Temperature accuracy
Temperature Controller
Over temperature safety
Shaker speed
Shaker orbit
Shaker max load
Shaker timer
Timer increments
Interior electrical outlet
Chamber volume
Exterior dimensions w x d x h
Chamber dimensions w x d x h
Electrical Ratings and Unit Size
I-5311-DS
I-5311-DS-230V
* Max load is 4 x 2 liter flasks with 400ml liquid in each flask

UNPACKING

Upon receipt of your I-5311-DS shaking incubator, examine the carton and unit for damages. If shipping
damage has occurred, a claim must be filed with the carrier. The carrier is responsible for correcting
shipping damages. Save all packaging until the unit has been shown to operate properly to
your satisfaction. Carefully remove the unit from the carton and shipping pallet.
Ambient +5C to 70C (Ambient +10°C with shaker on)
+/-0.3C / +/-0.5C
+/-0.2C
Microprocessor - User Calibratable
Independently settable
20 to 300 rpm
19mm
7.4kg*
Continuous (Hld) or 30 seconds to 99 minutes 50 seconds
30 seconds to 9 min 59 seconds in 1 second steps
10.0 minutes to 99 min 50 seconds in 10 second increments
1 amp
2.5 cu ft / 70 liters
574 x 544 x 644mm
442 x 396 x 406mm
120V, 50/60Hz, 6 amps
230V, 50/60Hz, 4 amps