Page 1
GYROTWISTER-3 D SHAKER User Manual S1000-B S1000-B-230V S1000-A-B S1000-A-B-230V Lit M00712 Sept 2016...
Page 3
1.0 GENERAL SPECIFICATIONS Electrical requirements: 115V model 115V 10% - 50/60Hz, 0.3A 230V model 230V 10% - 50/60Hz, 0.15A Fuse 2 x 0.5A 230V ; 2 x 1A 115V Speed from 3 to 60 rpm Tilt angle - S1000-B 3D/fixed 7° pitch Tilt angle - S1000-A-B 3D/adjustable ±...
Page 4
3.0 INSTRUCTIONS FOR USE START STOP POWER SPEED TIME (RPM) (MIN) HOLD 1. POWER switch – to turn the shaker ON (power switch illuminates) or OFF 2. SPEED potentiometer – to set the shaker speed 3. TIME potentiometer – to set timed operation 4.
Page 5
Problem Explanation / Solution POWER switch doesn’t light up Check the power connection, Check fuses Call Labnet Service Department Shaker does not START Check the power connection, Check fuses Call Labnet Service Department 5.0 ROUTINE MAINTANCE / CLEANING No routine maintenance or lubrication is required.
Page 6
EQUIPMENT DISPOSAL-EUROPEAN REGULATIONS According to Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), Gyrotwister is marked with the crossed-out wheeled bin and must not be disposed of with domestic waste. Consequently, the buyer shall follow the instructions for reuse and recycling of waste electronic and electrical equipment (WEEE) provided with the products and available at the...
Page 7
Warranty Statement Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of one (1) year from date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
Need help?
Do you have a question about the GYROTWISTER-3D and is the answer not in the manual?
Questions and answers