•
Flip-In Style Maintenance Devices:
Flip both maintenance devices into the roller tracks. Both maintenance devices must
be used.
MAINT. DEVICES
STOWED (BOTH SIDES)
•
Drop-In Style Maintenance Devices:
Place both maintenance devices into the roller tracks. Place the devices such that the
long side is in contact with the side of the base frame and the end of the device is in
contact with the end of the base frame.
4. Lower the lift until the weight of the lift is supported by the maintenance devices. Continue
to hold the down button for five seconds to relieve hydraulic system pressure.
Presto Lifts
MAINT. DEVICES
STOWED (BOTH SIDES)
MAINT. DEVICE AGAINST SIDE
AND FRONT OF BASE FRAME
20
MAINT. DEVICES
ENGAGED
(BOTH SIDES)
MAINT. DEVICES
ENGAGED (BOTH SIDES)
PDL Manual