Advertisement
To ensure the optimal connection of the contacts and to achieve
the specified degree of protection, the knurled nut has to be
screwed on until
To disconnect the hand-held terminal, unscrew the panel connector and
place the short-circuit-connector on the flange of the connection module
IndraControl VAC 31.1 with little force. The correct position is reached when
the connector snaps in correctly. Now turn the knurled nut on the flange by
applying little pressure.
24. Januar 2011
the fixed stop is reached.
Seite 7 von 8
R911333527-AA_BPZ_DOC
Advertisement
