Advertisement
Quick Links
Always Wear a Safety Harness with this Product
Practice Using at Ground Level
Weight Limit: 500 lbs. (300lbs. For An Individual User)
Tree Size: 9"-18" diameter
Instruction and Safety Manual
J
Q
F
D
G
X
U
K
Every year serious injury or death can occur from hunting related accidents.
To ensure your safety, please COMPLETELY read and follow this safety manual
and ALL warning labels BEFORE assembling, installing or utilizing this product.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY
WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE UNSURE
ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION
CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE
DEPARTMENT AT 1-866-972-6168 OR VISIT
WWW.PRIMALVANTAGE.COM/.REALTREE. KEEP AND MAINTAIN THIS SAFETY
AND INSTRUCTION MANUAL IN A SAFE
LOCATION FOR FUTURE REFERENCE.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
MODEL: RTLS-502
15' TWO-MAN LADDERSTAND
R
I
H
M
W A R N I N G
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
R
P
N
E
L
T
Z
S
O
Y
AA
Z
W
9
©2019 (rev. 1/19)
Advertisement
Related Manuals for Realtree RTLS-502
Summary of Contents for Realtree RTLS-502
- Page 1 WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE UNSURE ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT 1-866-972-6168 OR VISIT WWW.PRIMALVANTAGE.COM/.REALTREE. KEEP AND MAINTAIN THIS SAFETY AND INSTRUCTION MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE. ©2019 (rev. 1/19) Distributed by Primal Vantage Company Inc., 2407 W.
- Page 2 NEVER fall asleep in your stand as you may fall out resulting in serious injury or death. ALWAYS be sure to retighten all bolts BEFORE each new use of treestand. ALWAYS have a minimum of three people present when installing or removing this treestand. ©2019 (rev. 1/19) CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 PRIMALVANTAGE.COM/REALTREE...
- Page 3 Exceeding the ladderstand's weight limit may cause conditions including (but not limited to) lightning, freezing rain, the treestand to break or fail resulting in serious injury or death. high wind that could create slippery or dangerous conditions. ©2019 (rev. 1/19) CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 PRIMALVANTAGE.COM/REALTREE...
-
Page 4: Proper Care And Maintenance
• All photos are taken from the front view unless otherwise noted. • In most cases, bolts come with two nylon washers. One washer will be placed against the bolt head the other washer will be placed against the nut. ©2019 (rev. 1/19) CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 PRIMALVANTAGE.COM/REALTREE... - Page 5 MODEL: RTLS-502 15’ TWO-MAN LADDERSTAND Always Wear a Safety Harness with this Product Practice Using at Ground Level Bottom Ladder Middle Ladder Weight Limit: 500 lbs. Section (1) Section (1) Seat Platform (1) Tree Size: 9”-18” diameter Top Ladder PARTS LIST Section (1) 1 Top Ladder Section....
- Page 6 MODEL: RTLS-502 Assembly Instructions Page 1 15 Ft. Two-man Ladderstand ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED Remove all contents from packaging and make sure all parts are present before attempting to assemble. Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
- Page 7 MODEL: RTLS-502 Assembly Instructions Page 2 15 Ft. Two-man Ladderstand Attach Tree Brace to the top ends of the Platform Frames using 2-M8X60 bolts . Make sure the 2-M8X60 bolt inserted from the bottom up and the nut is on top.
- Page 8 MODEL: RTLS-502 Assembly Instructions Page 3 15 Ft. Two-man Ladderstand Attach Foot Platform to the bottom of the using 2-M8X55 bolts Seat Supports Attach top of Yokes to the Foot Platform using 2-M8 X 45 bolts Attach Ladder Step to the front of Ladder...
- Page 9 MODEL: RTLS-502 Assembly Instructions Page 4 15 Ft. Two-man Ladderstand Insert Shooting Rail Sides into front Shooting Rail and secure with 1-M6x25mm bolt on each side Attach Back Shooting Rail using 2-M6X50 bolts Attach Rail Covers and Seat Attach combined Shooting Rail...
-
Page 10: Side View
MODEL: RTLS-502 Assembly Instructions Page 5 15 Ft. Two-man Ladderstand SIDE VIEW Note: Nut side up here Attach Jaws to rear ends of Platform Frames using 2-M8x75mm bolts with washers center spacers located here strap passes through this metal loop Carefully tilt ladder stand assembly forward so that the bottom is facing forward and the rear is facing upward. -
Page 11: Rear View
MODEL: RTLS-502 Assembly Instructions Page 6 15 Ft. Two-man Ladderstand Rear View Attach the Ratchet Straps on either side of the top rear Tree Connection Brace on the rear of the Platform Frames (as shown above). (See Ratchet Strap Instructions for correct weaving). - Page 12 MODEL: RTLS-502 Ratchet Strap Instructions 15 Ft. Final Shot Two-man Ladderstand You MUST follow these instructions prior to installation Pull to tighten. Insert Ratchet through loop. Place looped end of Ratchet under platform. Pull to tighten. Place looped end of strap Insert strap through loop.
- Page 13 MODEL: RTLS-502 Installation Strap Instructions 15 Ft. Final Shot Two-man Ladderstand Insert end of strap through the loop. Pull to tighten. Continue with Place looped end of strap these steps to install the other under platform. strap on the other strap on the other side of the platform.
-
Page 14: Installation Instructions
MODEL: RTLS-502 Installation Instructions Page 1 15 Ft. Two-man Ladderstand Position bottom of stand 4-5 feet from base of tree. One person will stand at the base of ladder with his/her foot on the bottom rung while holding installation straps. This will prevent tree stand from sliding. - Page 15 MODEL: RTLS-502 Installation Instructions Page 2 15 Ft. Two-man Ladderstand Attach Tiedown Rope just behind the brace of the inner part of Stabilizer Bar Cross Installation Straps behind tree. Attach to bottom ladder Move base of ladder toward or Position the Stabilizer Bar against the tree and...
- Page 16 MODEL: RTLS-502 Installation Instructions Page 3 15 Ft. Two-man Ladderstand NOTE: The Ladder Jaws are designed to wrap around a tree trunk when Vertical Jaw Assembly Vertical Strap is tightened. Before engaging the Ladder Jaw Mechanism: 1) Check that the Ladder stand is properly installed on correct sized tree.
- Page 17 W A R N I N G Failure to follow all warnings listed below could result in serious injury or death. NEVER use this tree stand on a dead, leaning, loose ALWAYS read and understand all warnings and instructions DO NOT use this tree stand while under the influence of barked tree or on a utility pole as the tree may fall, break, before each use of this product.