NetComm Wireless NF5 User Manual page 59

Caller ID
The Caller ID page enables you to configure whether your Caller ID is sent when receiving an inbound call.
(If supported by your VOIP service)
Click Save Save Save Save to save your settings or Un
Flash Time
The Flash Time page enables you to configure the minimum and maximum time a hook flash signal can occur for the NB16WV-02
to recognise it.
FXS Flash Signal Detect (MAX)
FXS Flash Signal Detect (MIN)
This setting should not need to be changed unless directed to do so.
Click Save Save to save your settings or Undo
Save Save
NetComm Wireless NF5 User Guide
59
All manuals and user guides at all-guides.com
OPTION
Caller ID Select to use or Disable Caller ID.
Undo Un Un do to discard the settings entered. do do
OPTION
Enter the maximum time (in milliseconds) to detect a hook flash.
Enter the minimum time (in milliseconds) to detect a hook flash.
Undo to discard the settings entered.
Undo Undo
DEFINITION
DEFINITION
www.netcommwireless.com