Table of Contents
Advertisement
Select the type of WAN connection:
Dynamic IP Address
a.
Enter the Host Name (Optional)
b.
Enter the MAC Address of your device which is registered with the ISP
Static IP Address
a.
Enter the Static IP Address
b.
Enter the Static Subnet Mask
c.
Enter the Static Gateway
d.
Enter the Static Primary and Secondary DNS.
PPP over Ethernet (or PPPoE)
Enter the PPPoE Username and Password supplied by your service provider.
PPTP
a.
Enter the Server IP Address/Name
b.
Enter the PPTP Account and PPTP Password.
L2TP
a.
Enter the Server IP Address/Name
b.
Enter the PPTP Account and PPTP Password.
Click Next
Next when you have entered the required details.
Next
Next
3.
If you want to change the Wireless network settings, you can do so on this page. You can enable or disable the Wireless
network, select whether to broadcast your SSID or not and change the Wireless network name. Change the settings as
needed and click Next
Next.
Next
Next
(If you wish to use the default settings, click Next
NetComm Wireless NF5 User Guide
15
All manuals and user guides at all-guides.com
Next)
Next
Next
www.netcommwireless.com
Advertisement
Table of Contents
