NetComm Wireless NF5 User Manual page 53

VLAN
The VLAN page provides you with the ability to create Virtual Local Area Networks (VLANs). A VLAN is layer-2 network which has
been partitioned to create multiple distinct broadcast domains. The purpose of this is to isolate packets so that they may only
pass between these broadcast domains via one or more routers.
OPTION
Ethernet
WAN/LAN
VID
Tx TAG
To adjust advanced WAN VLAN settings for a particular VID, click the WAN VLAN Settings
displayed:
OPTION
VID
Routing Type
DHCP Setting
Setting Routing Type Routing Type to Bridge Bridge displays further options:
Routing Type Routing Type Bridge Bridge
OPTION
VID
Routing Type
WAN type
WAN Map VLAN ID
NetComm Wireless NF5 User Guide
53
All manuals and user guides at all-guides.com
The number of the physical port on the rear of the router for which the VLAN will be
created.
The function of the port. Port 1 only functions as a WAN port.
The Virtual LAN ID you want to assign to the VLAN.
Selecting this option will tag packet headers with the VLAN ID.
Use the drop down list to select the VID you want to configure.
Use the drop down list to type of routing for the selected VID.
Displays the current DHCP setting.
Use the drop down list to select the VID you want to configure.
Use the drop down list to type of routing for the selected VID.
Use the drop down list to select which WAN type the VLAN uses.
Enter the VLAN ID to tag packets on the WAN interface.
DEFINITION
WAN VLAN Settings button. The following window is WAN VLAN Settings WAN VLAN Settings
DEFINITION
DEFINITION
www.netcommwireless.com