Advertisement
Wireless Setup guide
Login to Web User Interface
1
Connect a computer and the NF12 using an Ethernet cable. (A yellow Ethernet cable was provided with your NF12).
2
Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address bar and
press Enter.
http://192.168.1.1
3
Enter the following credentials in the User Name and Password fields:
User Name:
admin
Password:
admin
Note – If no authentication prompt is displayed or you see a request time out message, refer to
Interface guide" from FAQs section
Login screen
.
Wireless Setup Guide
"What if I cannot access Web User
NF12 FAQs
Advertisement
Table of Contents
Related Manuals for NetComm Wireless NF12
Summary of Contents for NetComm Wireless NF12
- Page 1 Login to Web User Interface Connect a computer and the NF12 using an Ethernet cable. (A yellow Ethernet cable was provided with your NF12). Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address bar and press Enter.
- Page 2 Confirm that Enable Wireless and Enable Wireless Multicast Forwarding (WMF) are selected. The default SSID (network name) on this example is “NetComm 8386”. You may change the SSID and press the “Apply/Save” button. 2 of 6 Wireless Setup Guide © NetComm Wireless 2017...
- Page 3 The configuration in the modem is now complete. Use computer/laptop, mobile or iPad to scan Wi-Fi network name, select the right Wi-Fi network name/ SSID (Example: NetComm 8386) enter the displayed Wi-Fi password to join the network. NF12 FAQs 3 of 6 © NetComm Wireless 2017...
- Page 4 Enter the WiFi security key/password and click Next. Your computer connects to the WiFi network. If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from FAQs section. 4 of 6 Wireless Setup Guide © NetComm Wireless 2017...
- Page 5 The word Connected will appear under your WiFi network name/SSID [4] when the connection is successful. If you are facing difficulty to connect the Wi-Fi network name, refer to “Wireless Troubleshooting Guide” from FAQs section. NF12 FAQs 5 of 6 © NetComm Wireless 2017...
- Page 6 Airport icon again. Your WiFi network has a tick next to its name. The wireless network configuration is complete and you can now use the Internet. You can disconnect the Ethernet cable, if you wish. 6 of 6 Wireless Setup Guide © NetComm Wireless 2017...
Need help?
Do you have a question about the NF12 and is the answer not in the manual?
Questions and answers