NetComm Wireless NF5 User Manual page 51

IPv6
The IPv6 page enables you to configure the settings used for an IPv6 connection (if supported by your Internet Service Provider).
OPTION
IPv6
IPv6 Connection
DNS Setting
Primary DNS Address
Secondary DNS Address
LAN IPv6 Address
LAN IPv6 Link-Local Address
Autoconfiguration
Autoconfiguration Type
Router Advertisement Lifetime
NetComm Wireless NF5 User Guide
51
All manuals and user guides at all-guides.com
Select to enable or disable IPv6 functionality.
Select the type of IPv6 connection to utilise for your service. You can select from:
Static IPv6
DHCPv6
PPPoE
6 to 4
IPv6 in IPv4 Tunnel
PPPoA
Select the type of connection as required by your Internet Service Provider for their IPv6 service.
Select whether to automatically obtain DNS Server addresses or use the ones you manually specify.
Enter the Primary DNS Address for the IPv6 connection.
Enter the Secondary DNS Address for the IPv6 connection.
The IP Address to use for the IPv6 service connection.
The current local LAN IPv6 address of the NF5.
Select to enable or disable IPv6 auto configuration (if supported by your Internet Service Provider).
Select the appropriate type of auto configuration mode as required by your Internet Service Provider for their IPv6 service.
Enter the length of time between the router advertising its availability on the IPv6 connection.
DEFINITION
www.netcommwireless.com