Recoil Starter - Yamaha MZ360 Service Manual

PERIODIC MAINTENANCE
1
2
3
4
b
5
6
7
8
9
2
10
c d
3.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Adjustment steps:
1 2
a
Direction "a"
High engine speed is decreased.
Direction "b"
High engine speed is increased.
a
3
Direction "c"
Low engine speed is decreased.
Direction "d"
Low engine speed is increased.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲

RECOIL STARTER

1.
Adjust:
• Engine speed
a. Loosen the throttle stop screw "1".
b. Move the throttle lever "2" to direction "a" or "b" until
the high engine speed is obtained.
High engine speed:
3750–3850 r/min (MX360)
c. Tighten the throttle stop screw "1" until it touches
the throttle lever.
d. Move the throttle lever "2" to direction "a" until it
stops.
e. Turn the throttle stop screw "3" (carburetor) in direc-
tion "c" or "d" until the low engine speed is obtained.
Low engine speed:
1900–2100 r/min (MX360)
Check:
• Recoil starter operate smoothly
Rough movement  Replace the defective part(s).
(Refer to "CHECKING THE RECOIL STARTER
(MZ360/MZ400)" on page 3-10 and "CHECKING
THE RECOIL STARTER (MX360)" on page 3-14)
2-18