Shorten
4. Adjust the strap length to secure the
seat.
To shorten the strap, pull the free end; to
lengthen it, turn up the tab and pull the
strap.
After returning the seat, make sure
the seat is securely locked by push-
ing forward and rearward on the top
of the seatback or by trying to pull
up the edge of the bottom cushion.
Failure to do so will prevent the seat
belt from operating properly. Be cer-
tain to replace head restraints.
Lengthen
CAUTION
—Tumbling rear seat (type B)
BEFORE TUMBLING REAR SEAT
1. Slide the front seats forward.
2. Lower the head restraints of the rear
seat to the lowest position.
3. Latch the seat belt tab into the
buckle as shown in the illustration.
This prevents the seat belt from falling out
when you tumble the rear seat.
37