Toyota Land Cruiser 2016 Owner's Manual page 216

When connecting the jack handle exten-
sion/extensions and jack handle end, use
the jack handle to tighten the bolt on the
joint as shown in the illustration.
When you tighten the bolt, make sure that
it fits into the depression on the joint.
When connecting the jack handle with the
extension, tighten the wing bolt on the
joint securely by hand.
NOTICE
Tighten all joints securely. Otherwise,
the extension may come off and it
may damage the paint or vehicle
body.
—Raising your vehicle
6. After making sure that no one is in
the vehicle, as the jack touches the
vehicle and begins to fit, double−
check that it is properly positioned.
When positioning the jack under the axle
housing, make sure the groove on the top
of the jack fits with the axle housing.
7. Raise the vehicle high enough so
that the spare tire can be installed.
Remember you will need more ground
clearance when putting on the spare tire
than when removing the flat tire.
To raise the vehicle, insert the jack handle
end into the jack (it is a loose fit) and
turn it clockwise with the handle.
CAUTION
Never get under the vehicle when it
is supported by the jack alone; use
vehicle support stands.
207