Toyota Land Cruiser 2016 Owner's Manual page 205

Discharged battery
Positive
terminal
Positive terminal
("+" mark)
Jumper
("+" mark)
cable
3. Make the cable connections in the or-
der a, b, c, d.
a. Connect the clamp of the positive
(red) jumper cable to the positive (+)
terminal on the discharged battery.
b. Connect the clamp at the other end
of the positive (red) jumper cable to
the positive (+) terminal on the booster
battery.
196
Booster
battery
Discharged
Booster
battery
battery
c. Connect the clamp of the negative
(black) jumper cable to the negative
(−) terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting points
are shown in the following illustration:
Jumper cable
Negative terminal
("−" mark)
Connecting point
Do not connect the cable to or near
any part that moves when the engine
is cranked.
When making the connections, to
avoid death or serious injury, do not
lean over the battery or accidentally
let the jumper cables or clamps touch
anything except the correct battery
terminals or the ground.
CAUTION