Table of Contents
Advertisement
Programming Steps
The following programming steps are meant as an overview. For more information on each programming area, see the Alliance System
Programming Manual.
Text words
Program any needed text words that are not included in the word library. See the Alliance System Programming Manual to view the word
library.
1
Press MENU, enter 1278, and press ENTER to access the system menu.
2
Enter 19 and press ENTER to access installer programming. Press MENU (advanced menu).
3
Enter 10 and press ENTER to access program text.
4
Enter the text word number (custom text word numbers start at 900) and press ENTER.
5
Using the number keys, enter the required letter. Press the ENTER key to advance to the next letter. Press the MENU to advance to
the next word. Press the CLEAR key to exit this menu option.
Time zones
Program time zones to allow certain automatic functions, such as Auto Arm or only allow certain users access during predetermined time
periods.
1.
Press MENU, enter 1278, and press ENTER to access the system menu.
2.
Enter 19 and press ENTER to access installer programming. Press MENU (advanced menu).
3.
Enter 13 and press ENTER to access time zone programming.
4.
Enter the time zone number and press ENTER.
5.
Enter the start time hour and press ENTER.
6.
Enter the start time minute and press ENTER.
7.
Enter the end time hour and press ENTER.
8.
Enter the end time minute and press ENTER. The start and end times will display on the top line of the keypad display.
9.
Press ENTER to advance to the day field.
10. Enter 1 through 7 (Sunday through Saturday) or 8 (holiday) for each day needed for this time zone and press ENTER.
Repeat steps 5 through 10 for each access time needed for this time zone (four available).
Areas
Program areas to configure individual areas, or partitions, as autonomous systems, or as parts of a single larger system.
1.
Press MENU, enter 1278, and press ENTER to access the system menu.
2.
Enter 19 and press ENTER to access installer programming. Press MENU (advanced menu).
3.
Enter 2 and press ENTER to access the area database programming.
4.
Enter the number of the area to be configured and press ENTER.
5.
Program the area name numeric code by selecting one of the default names from the word library or from text words added in text
word programming and press ENTER.
6.
Enter the exit time for this area and press ENTER.
7.
Enter the entry time for this area and press ENTER.
8.
Enter the event flags and press [ENTER].
9.
Enter the out-of-hours time zone, if required, and press ENTER.
10. Enter the area disarmed time (used in conjuction with the alarm group restriction) and press ENTER.
11. Select the central station the area will report to and press ENTER.
12. Select audio listen-in, if required, and press ENTER.
13. Select exit fault report, if required, and press ENTER.
14. Select A & B alarm verification reporting, if required, and press ENTER.
15. Select disable arming if all inputs are bypassed, if required, and press ENTER.
Repeat steps 1 through 12 for all areas in the system.
12
AL-2017/AL-3017 Installation Manual
Advertisement
Table of Contents
