Table of Contents
Advertisement
By using cleaning solution
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water
tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor
or surrounding objects and surface. Plug the unit in, turn the unit ON by pressing
the power switch and allow the unit to produce steam unit the vinegar/water
solution in used up.
3.
Repeat the above procedure as many times as necessary unit a normal steam flow
rate is achieved.
4.
Fill the water tank with fresh water and rinse ours.
5.
Fill the water tank with fresh water, attach to the unit and releasee steam through
the system unit the water tank is empty.
WARNING: Don't leave the appliance during the lime scale removal
process and/or while in use
Notice:
Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure
that there is no debris left in the system.
This product contains no serviceable parts. Do not try to repair it by yourself. Any servicing
that requires disassembly other than cleaning must be performed by a qualified appliance
repair technician.
All servicing should be done by an authorised service representative.
Cleaning Microfiber Pad
•
Machine washable on "warm" setting. Always use a mild detergent.
•
For best care results, lay flat to dry.
•
Important: Allow the steamer to fully cool down before performing any
maintenance or troubleshooting checks.
•
Important: Never use bleach or fabric softener when washing the microfiber
cleaning pad.
13
Advertisement
Table of Contents
