Related Manuals for GTE DICOS HOTSPOT-X20
Summary of Contents for GTE DICOS HOTSPOT-X20
- Page 1 HOTSPOT-X20 Supplementary Instruction Manual for X20-Detectors IR-Temperatur Detector GTE Industrieelektronik GmbH | Helmholtzstr. 21, 38 – 40 41747 Viersen | Germany | +49 2162 3703-0 | info@gte.de...
- Page 2 41747 Viersen GERMANY Support hotline: +49 2162 3703-0 E-Mail: support.adicos@gte.de © 2020 GTE Industrieelektronik GmbH – This document and all figures contained may not be copied, changed, or distributed without explicit approval by the manufacturer! Subject to technical changes! ADICOS and GSME are registered trademarks of GTE Industrieelektronik GmbH.
- Page 3 ABSTRACT Brief Description The Advanced Discovery System (ADICOS) is used for early detection of fires in industrial environments. It is comprised of various separate detector units. With aid of suitable arrange- ment and parameterization the system meets a specified detection goal, without being sus- pectible to interference.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Table of Contents About this manual ........... . . Objective . -
Page 5: About This Manual
ABOuT THIS MANuAl About this manual Objective This manual describes the special requirements on installation, wiring, commissioning, and operation of ADICOS detectors for explosive atmospheres. They are exclusively addressed to knowledgeable specialist personnel (–› Chap. 2, Safety instructions). Explanation of symbols This manual features a continuous structure for best possible comprehension. -
Page 6: Safety Instructions
SAfETY INSTRuCTIONS Safety instructions ADICOS HOTSPOT-X20 detectors for explosive atmospheres ensure operational safety as- suming proper installation, commissioning, operation, and maintenance. for this purpose, it is absolutely required to completely read, understand, and follow these instructions and the safety information contained. WARNING! Installation and operating errors can lead to fatal and severe injuries and dam- age to the industrial plant. -
Page 7: Personnel Qualification
SAfETY INSTRuCTIONS Personnel qualification Any work on the control may only be performed by qualified personnel. Persons, who can per- form work on electrical systems and recognize possible dangers based on their professional education, knowledge, and experience as well as knowledge of the applicable provisions, are considered qualified personnel. -
Page 8: Structure
STRuCTuRE Structure Overview Description Detector enclosure Signal dome Explosion-proof cable gland Pre-assembled ADICOS connection cable Cable assignment Wire Color Signal Signal limit contact black Operating voltage 24 ... 40 V DC non-polarized white black Relay output X6 e... -
Page 9: Display Elements
STRuCTuRE Auxiliary Relay Wire Color Auxiliary relay black white black white Display elements Signal Dome The signal dome is a translucent element. It includes the status lED to indicate the operating condition of the X20 detectors: Normal operation = green Alarm = red fault = yellow ADICOS HOTSPOT-X20... -
Page 10: Installation
INSTAllATION Installation Mounting with ADICOS Mounitng Plate WARNING! ADICOS HOTSPOT-X20 detectors must be mounted with closed enclosure. • Do not open enclosure! • Use ADICOS Mounting Plate! 410-2410-016 EN21 ADICOS HOTSPOT-X20... -
Page 11: Installation On Mounting Bracket
INSTAllATION Installation on Mounting Bracket WARNING! ADICOS HOTSPOT-X20 detectors must be mounted with closed enclosure. • Do not open enclosure! • Use ADICOS Mounting Bracket ADICOS HOTSPOT-X20 410-2410-016 EN21... -
Page 12: Wiring
COMMISSIONING Wiring DANGER! The electronics of ADICOS HOTSPOT-X20 detectors require an electrical volt- age that can trigger an explosion in potentially explosive atmospheres. • Do not open enclosure! • De-energize the entire detector system and secure against unintentionally reactivation for all wiring work! •... -
Page 13: Maintenance
MAINTENANCE Maintenance Detector replacement DANGER! The electronics of ADICOS HOTSPOT-X20 detectors require an electrical volt- age that can trigger an explosion in potentially explosive atmospheres. • Do not open enclosure! • De-energize the entire detector system and secure against unintentionally reactivation for all disassembly work! •... -
Page 14: Appendix
APPENDIX Appendix ADICOS mounting plate 1 5 0 1 3 0 6 , 4 A - A 410-2410-016 EN21 ADICOS HOTSPOT-X20... -
Page 15: Adicos Mounting Bracket
APPENDIX ADICOS Mounting Bracket 8,50 ADICOS HOTSPOT-X20 410-2410-016 EN21...