Hose Assembly / ﺗﺭﻛﻳﺏ ﺍﻟﺧﺭﻁﻭﻡ
• Insert the Curved Wand and Hose Connection Pipe into the Hose Supporter at each end of the Hose
Assembly until the Projection clicks into the Hole of the attachment.
ﺍﻟﺧﺭﻁﻭﻡ ﻋﻧﺩ ﻛﻝ ﻁﺭﻑ ﻣﻥ ﺃﻁﺭﺍﻑ ﺍﻟﺧﺭﻁﻭﻡ ﺣﺗﻰ ﻳﺗﻡ ﺗﺛﺑﻳﺕ ﺍﻟﻧﺗﻭء ﺑﺈﺣﻛﺎﻡ ﻓﻲ
Hose Assembly
Curved Wand
ﺍﻷﻧﺑﻭﺏ ﺍﻟﻣﻘﻭﺱ
HOW TO OPERATE THE APPLIANCE
Pull out the Plug and connect to the socket outlet.
1
Press "I"(ON) to turn on the appliance.
2
Press "O"(OFF) to turn off the appliance.
3
." )ﺇﻳﻘﺎﻑ ﺗﺷﻐﻳﻝ( ﺃﺧﺭﻯ ﻹﻳﻘﺎﻑ ﺗﺷﻐﻳﻝ ﺍﻟﺟﻬﺎﺯO" ﺍﺿﻐﻁ ﻋﻠﻰ
After fi nish vacuuming, remove the Plug from the socket outlet and press the Cord Rewind Button.
4
• When rewinding the Supply Cord, always hold the Plug so that it does not become damaged.
1
2007_MC-CG373_371 EA.indd 8
2007_MC-CG373_371 EA.indd 8
Hose Supporter
ﻣﺳﻧﺩ ﺍﻟﺧﺭﻁﻭﻡ
ﺗﺭﻛﻳﺏ ﺍﻟﺧﺭﻁﻭﻡ
Projection
Hole
ﺛﻘﺏ
.ﺍﺳﺣﺏ ﺍﻟﻘﺎﺑﺱ ﻹﺧﺭﺍﺟﻪ ﻭﻭﺻﻠﻪ ﺑﻣﻘﺑﺱ ﺍﻟﻛﻬﺭﺑﺎء
." )ﺗﺷﻐﻳﻝ( ﻟﺗﺷﻐﻳﻝ ﺍﻟﺟﻬﺎﺯI" ﺍﺿﻐﻁ ﻋﻠﻰ
.ﺑﻌﺩ ﺍﻻﻧﺗﻬﺎء ﻣﻥ ﺍﻟﻧﻔﺦ ﺃﻭ ﺍﻟﺷﻔﻁ، ﺍﻧﺯﻉ ﺍﻟﻘﺎﺑﺱ ﻣﻥ ﻣﻘﺑﺱ ﺍﻟﺗﻳﺎﺭ ﺍﻟﻛﻬﺭﺑﺎﺋﻲ ﻭﺍﺿﻐﻁ ﻋﻠﻰ ﺯﺭ ﻟﻑ ﺍﻟﺳﻠﻙ
2
3
OFF/ON Switch
/ﻣﻔﺗﺎﺡ ﺍﻟﺗﺛﻐﻳﻝ
ﺍﻹﻳﻘﺎﻑ
• ﺃﺩﺧﻝ ﺍﻷﻧﺑﻭﺏ ﺍﻟﻣﻘﻭﺱ ﻭﺃﻧﺑﻭﺏ ﺗﻭﺻﻳﻝ ﺍﻟﺧﺭﻁﻭﻡ ﻓﻲ ﻣﺳﻧﺩ
ﺗﺭﻛﻳﺏ
Hose Connection Pipe
Hole
ﻧﺗﻭء
ﺛﻘﺏ
.• ﻋﻧﺩ ﻟﻑ ﺳﻠﻙ ﺍﻟﻛﻬﺭﺑﺎء، ﺃﻣﺳﻙ ﺩﺍﺋ ﻣ ًﺎ ﺑﺎﻟﻣﻘﺑﺱ ﺣﺗﻰ ﻻ ﻳﺗﻠﻑ
4
8
.ﺛﻘﺏ ﺍﻟﻭﺻﻠﺔ
ﺃﻧﺑﻭﺏ ﺗﻭﺻﻳﻝ ﺍﻟﺧﺭﻁﻭﻡ
ﻛﻳﻔﻳﺔ ﺗﺷﻐﻳﻝ ﺍﻟﺟﻬﺎﺯ
8/25/2020 4:12:03 PM
8/25/2020 4:12:03 PM