Operator Skills and Training
2.1 - Skills
Operators using UNI-ClipDoc need:
●
The strength, balance, coordination and common sense to
safely operate the equipment
●
The ability to select the proper equipment and procedures
for the circumstances
●
The ability to read, understand and follow the procedures
as described in this manual
●
To have full training on the proper operation of the
equipment
●
To have a working knowledge of manual handling
procedures
6
2 - OPERATOR SKILLS AND TRAINING
Untrained operators can cause injury or be injured.
Permit only trained personnel to operate the
Improper use of the UNI-ClipDoc can cause injury.
Use the UNI-ClipDoc only for the purpose described
2.2 - Training
Operator trainees need to:
●
Have followed a training plan
Read and understand the instructions in this manual
●
Practice using the fully-equipped equipment with weight
●
and under simulated conditions
Trainees should be tested to verify their understanding of
●
UNI-ClipDoc operation
Keep training records. Annual refresher training for all
●
operators is recommended
WARNING
UNI-ClipDoc
WARNING
in this manual.
FERNO/MAN/0721/220-R2/UK