Removal Of Fixing-Bars - Ferno UNI-ClipDoc Manual

UNI-ClipDoc
5.6

Removal of fixing-bars

FIG 10
Unlock the ratchet mechanism by lifting the lever marked release and rotate the ratchet lever
down fully.
FIG 12
Take hold of the strap just below the tang (as shown above) and pull firmly to release the tension.
FIG 14
The tang can then be removed from the fixing point. The strap can be left hanging freely as the
Uni-ClipDoc is lifted clear of the trolley. Remember to return the ratchet handle to the locked
position to prevent damage during storage.
14
5.0 - OPERATION
FIG 11
FIG 13
FIG 15 FIG 16
FERNO/MAN/0721/220-R2/UK