Table of Contents
Advertisement
5.5
Installation using the ratcheting fixing-bars (cont...)
NOTE: THE STRAP MUST BE FED AROUND THE MAIN SIDE RAIL ONLY. DO NOT WRAP THE
STRAP AROUND ANY OTHER PART OF THE TROLLEY
FIG 5
Hook the tang onto one of the two fixing points on the UNI-ClipDoc fixing-bar.
FIG 7
Pull on the loose end of the strap to take up the slack.
NOTE: TO PREVENT MALFUNCTION OF THE RATCHET MECHANISM ENSURE THE SLACK IS
PULLED OUT OF THE STRAP AS SHOWN IN FIG 7 BEFORE RATCHETING THE LEVER.
Begin ratcheting the lever to tighten the strap. Do not tighten fully at this stage.
Repeat the above on all four ratchet straps.
When all ratchet straps are moderately tight, go around and fully tighten all four ratchets to
complete the installation.
FIG 9
FERNO/MAN/0721/220-R2/UK
5.0 - OPERATION
FIG 6
FIG 8
NOTE: ENSURE ALL FOUR RATCHET HANDLES ARE IN
THE VERTICAL, LOCKED, POSITION BEFORE USE
The Uni-ClipDoc is now ready for use.
UNI-ClipDoc
13
Advertisement
Table of Contents
