Rear tyre pressure (with
passenger)
2.0 bar (2.3 bar)
Spark plug dismantlement (03_10, 03_11, 03_12)
Removal
In order to inspect the spark plug, follow the operation described when the engine is
cold:
- Slide off the spark plug inspection cover «A» by unscrewing the screw «B».
- Slide off the spark plug tube «C».
- Remove the spark plug using the box-spanner supplied.
03_10
Fitting
- Use the box-spanner to refit the spark plug in its saddle, then tighten it. Care should
be taken while installing and fixing it with the correct inclination.
- Insert the spark plug tube «C».
- Place the inspection cover «A» and tighten the screw «B».
CAUTION
FOLLOW THESE PROCEDURES VERY CAREFULLY TO AVOID ANY SEVERE
03_11
DAMAGE THAT MAY BE CAUSED BY THE VERY POWERFUL IGNITION SYS-
TEM.
CAUTION
THE SPARK PLUG MUST BE REMOVED WHEN THE ENGINE IS COLD.
47