Advertisement
Quick Links
Quick start guide
PSoC™ 62S2 evaluation kit
CY8CEVAL-062S2
Kit contents
1. PSoC™ 62S2 evaluation board
2. Sterling-LWB5+ Wi-Fi / Bluetooth® M.2 radio module from Laird Connectivity
(plugged into the PSoC™ 62S2 evaluation board)
3. USB Type-A to Micro-B cable
4. FlexPIFA antenna from Laird Connectivity
5. Four jumper wires (four inches each)
6. Two jumper wires (five inches each)
7. Quick start guide (this document)
www.cypress.com/CY8CEVAL-062S2
Advertisement
Related Manuals for Infineon PSoC 62S2
Summary of Contents for Infineon PSoC 62S2
- Page 1 Quick start guide PSoC™ 62S2 evaluation kit CY8CEVAL-062S2 Kit contents 1. PSoC™ 62S2 evaluation board 2. Sterling-LWB5+ Wi-Fi / Bluetooth® M.2 radio module from Laird Connectivity (plugged into the PSoC™ 62S2 evaluation board) 3. USB Type-A to Micro-B cable 4. FlexPIFA antenna from Laird Connectivity 5.
- Page 2 Quick start guide USB cable connected to the KitProg3 Before you start USB connector 1. Ensure that you have the following: • PC with USB port • UART terminal software such as Tera Term or Minicom 2. Visit the kit website to download and install the required software.
- Page 3 Quick start guide PSoC™ 62S2 evaluation board details 11 13 14 15 36 18 19 KitProg3 USB connector (J9) Power LED (D6) KitProg3 status LED (D4) CAPSENSE™ slider (CSS1) and buttons (CSB1, CSB2) KitProg3 (PSoC™ 5LP) programmer and PSoC™ 6 MCU VDDIO2 current measurement jumper (J17) debugger (CY8C5868LTI-LP039, U2) PSoC™...
- Page 4 I/Os compatible with Arduino Uno R3 PSoC™ 6 MCU I/Os Interface compatible with mikroBUS by Mikroelektronika Note: *Not connected See the kit guide available at www.cypress.com/CY8CEVAL-062S2 for details. Document number: 002-33159 Rev. *C Date: 07/2021 All rights reserved. © 2021 Infineon Technologies AG...