Page 1
Painted Farmhouse Storage Console - OTNR6 & OTNR7 Thank you for purchasing our Pie Safe / Bookcase. Assembly of this product requires a phillips screwdriver. It is helpful to have a second person availble during the assembly of this product.
Page 2
Lay out parts on a non-abrasive surface to avoid scratching finish. DRAWING DESCRIPTION QTY. M6*35MM BOLT M6*30MM BOLT SHELF SUPPORT STEP 1 Identify and count all parts using diagram above. STEP 2 Identify and count hardware. Pntd Frmhs Storage Console 2 of 4 6/27/17...
Page 3
STEP 3 Lay top panel (A) upside down on non-abrasive surface and attach left side panel (B) to top panel (A) using 2 M6 * 35MM Bolts (I). Use Wrench (L) to install Bolts. Do not over tighten Bolts at this time. Assemble Loose.
Page 4
STEP 6 Position Bottom Panel (E) between the Left and Right Ends. Align the Groove in the Bottom with the Back Panel. Attach bottom panel to Vertical Dividers (H) using 4 M6 * 30MM Bolts (J) and to the Right and Left End Panels (B) and (C) with 4 M6 * 35MM Bolts (I).