Page 1
Painted Farmhouse 2 Shelf End Table - OTNQ3 & OTNQ4 Thank you for purchasing our 2 Shelf End Table. It is helpful to have a second person availble during the assembly of this product. Pntd Frmhs 2 Shelf End Table...
Page 2
Lay out parts on a non-abrasive surface to avoid scratching finish. DRAWING DESCRIPTION QTY. M6*45MM BOLT STEP 1 Identify and count all parts using diagram above. STEP 2 Identify and count hardware. Pntd Frmhs 2 Shelf End Table 2 of 3 6/27/17...
Page 3
STEP 3 Position Top Assembly (A) upside down on non- abrasive surface. Attach 2 Post (B) using 2 M6 * 45MM Bolts (E). Use Wrench (F) to install Bolts. Do not over tighten Bolts at this time. Assemble Loose. STEP 4 Align Shelf (D) with slots in Post (B).