MAINTENANCE
Important! Always remove the battery from the cleaner before performing any
maintenance.
Emptying the dust bin
1.
Disconnect the rod from the cleaner.
2.
Hold the cleaner over a rubbish bin and press
the dust release button to open and empty the
dust bin.
Replacing the cyclone separator
1.
Hold the cleaner over a rubbish bin and twist
the dust bin anti-clockwise to remove it.
2.
Following the direction of the arrow, twist the
cyclone separator and remove it from the
cleaner.
3.
Replace the cyclone separator with a new
one. Place the dust bin back onto the cleaner
and twist it clockwise until the dots line up and
it clicks into place.
17