Maintenance; How To Clear Blockages - WERTHEIM Deep Clean W3000 User Manual

MAIntEnAnCE

Hose/Wand Blockage
• Disconnect the powerhead and telescopic wand from handle.
• Plug vacuum in and turn it on. Check the hose end for suction. Remove
any obstructions.
• If there is no blockage in the hose, remove the powerhead from the
telescopic wand and attach the wand to the hose.
Mini Hand turbo Brush
10

How to Clear Blockages

• Low suction or pick up may be due to a
blockage in the system. Refer to the following
steps to check for blockages, continuing with
each step until the blockage is found.
WArnInG: EnSurE tHE ClEAnEr IS not
ConnECtED to tHE MAInS PoWEr SuPPlY WHEn
PErForMInG AnY MAIntEnAnCE ProCEDurES.
Step 1: Unlock the neck on the Mini Hand Turbo
Brush by twisting anti-clockwise.
Step 2: Push the release buttons on the side of the
Mini Hand Turbo Brush down to unlock the external
bristles. Rotate this bristle attachment upwards.
Step 3: Remove the clear cover.