Table of Contents
Advertisement
Available languages
Available languages
EN
TROUBLESHOOTING
Possible cause
Voltage switch (AC - 0 - DC) in
the wrong position.
The air pressure in the tyre or
object to be inflated is higher
than the set pressure.
The fuse in the 12 V plug has
tripped.
The plug is not plugged in.
Fuse in mains distribution
board/vehicle tripped.
Safety switch tripped.
The power cord is damaged.
24
Solution
Check that the right cord is in use and that the switch is the right
position – AC for mains power, DC for battery power from 12 V
socket in vehicle.
Set to a higher pressure.
Replace the fuse.
Plug in the plug.
Replace the fuse. If the product trips the fuse again stop using
the product immediately and take it to an authorised service
centre to be checked and repaired.
Reset safety switch. If the product trips the safety switch again
stop using the product immediately and take it to an authorised
service centre to be checked and repaired.
Have the cord replaced by qualified service personnel.
Advertisement
Table of Contents
