Battery power (12 V)
The engine should be running if possible when
the compressor is run from the 12 V socket.
If this is not possible (for environmental or
safety reasons) the ignition switch should be in
parking mode. Always pull out the full length
of the battery cord before use. Plug the plug
in the 12 V socket in the vehicle and press the
switch button marked DC to start the product.
To switch off the product, press the switch
button marked AC until the button clicks back
1 step to position 0. Clean the product with a
cloth moistened with a mild detergent. The
product must only be serviced by qualified
service personnel using identical spare parts.
MAINTENANCE
STORAGE
When the product is not in use store its
hose and cord in the storage compartment
underneath the product.
TROUBLESHOOTING
See next page.
EN
23