Maintenance And Troubleshooting; Specifications; Maintenance And Cleaning - Stadler Form QuickUp One Operating Instructions Manual

In some seconds after temperature regulator lighting will be fixed on a
bright luminescence, automatic water delivery in a cup will be executed.
After water delivery button lighting will be disconnected and Thermopot
will automatically be switched in standby mode.
To cancel carrying out this program or stopping water delivery just press
this button again.
NOTE
If the quantity of water in the tank isn't enough the lights of all buttons at
the control panel will blink, and water delivery will be locked
Push button for water delivery to a large cap (200ml)
This button is intended for heating and delivering 200 ml of water.
Choose temperature of water heating for a large cup by means of the regula-
tor. Then press this button, button lighting thus will go on. The temperature
regulator lighting will change intensity of a luminescence — it means that
water heating is carried out.
In some seconds after temperature regulator lighting will be fixed on a
bright luminescence, automatic water delivery in a cup will be executed.
After water delivery button lighting will be disconnected and Thermopot
will automatically be switched in standby mode.
To cancel carrying out this program or stopping water delivery just press
this button again.
NOTE
If the quantity of water in the tank isn't enough the lights of all buttons at
the control panel will blink, and water delivery will be locked.

MAINTENANCE AND ClEANING

• To avoid electric shock, never immerse the appliance in water.
• Before cleaning the thermopot, unplug it and wait for it to cool down
completely.
• Clean the external surfaces of the appliance with a soft damp cloth, and
then dry them with a soft dry cloth.
NOTE
To avoid water contamination and scale formation, change the water in
the tank regularly.
Removing scale
Minerals contained in tap water can accumulate on the inner surfaces of
the thermopot.
To keep your thermopot in good working order, remove the scale inside it
once a month, or more often, depending on the hardness of the water in
your area.
To remove the scale, refill the tank with water to the highest level mark and
add a few drops of white vinegar. Leave the solution in the thermopot for
12 hours or overnight. Then pour out the water, refill the tank with clean
water, boil and drain.

MAINTENANCE AND TROUBlESHOOTING

• For safety's sake, the appliance should be repaired only by qualified per-
sonnel at an authorized service center.
• The warranty does not cover damage due to unauthorized repairs or im-
proper use of the appliance.
• Never use a defective appliance or if you see visible damage to the ap-
pliance, cord or plug.
• Never disassemble the appliance yourself or insert any foreign objects
into any of the openings of the appliance.
• If the appliance is beyond repair, do not throw it away with household
waste. Spare a thought for the environment! A faulty appliance must
be disposed of at a recycling collection location. Call your local muni-
cipal services office to find out where you can drop off your worn-out
household appliances for recycling.
• When replacing an old electrical appliance with a new one, the responsi-
bility for recycling the old one rests with the seller.

SPECIFICATIONS

Power supply: 230 V, ~50 Hz
Power: 2200 W
Capacity: 1.7 L
Dimensions: 265 x 149 x 280 mm
Weight: 2220 gr
The manufacturer reserves the right to make alterations to the specifica-
tions.