Table 10.1 Advanced Imaging
Menu Item
Color Balance
•
Cyan
-5 to 5 (0*)
•
Magenta
-5 to 5 (0*)
•
Yellow
-5 to 5 (0*)
•
Black
-5 to 5 (0*)
•
Reset Defaults
Color Correction
•
Color Correction
–
Auto*
–
Off
–
Manual
Color Correction Content
Color Adjust
Note:
An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu Item
Print PS Error
•
On
•
Off*
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
•
On*
•
Off
Description
Adjust the amount of toner that is used for each
color.
Modify the color settings used to print documents.
•
Off sets the printer to receive the color correction
from the software.
•
Auto sets the printer to apply different color
profiles to each object on the printed page.
•
Manual allows the customization of the RGB or
CMYK color conversions applied to each object on
the printed page.
•
Color Correction Content is available only when
Color Correction is set to Manual.
Calibrate the printer to adjust color variations in the
printed output.
Description
Print a page that describes the PostScript error.
Note:
When an error occurs, processing of the
job stops, the printer prints an error message,
and the rest of the print job is flushed.
Set the minimum stroke width.
Note:
Jobs printed in 4800 CQ use half the
value.
Disable the SysStart file.
Note:
The default setting varies depending on
the printer model.
C235 מדפסת משולבת צבעונית
®
Xerox
בתפריטי המדפסת
שימוש
137
מדריך למשתמש