Information And Troubleshooting - Matrox DualHead2Go User Manual

To undo your last change, click
Choose a new display mode. Click
4
Change Display Setting
one from the list and clicking
Note:
new resolutions appear in the
resolutions don't appear, restart your computer, then re-open the
Setting

Information and Troubleshooting

Get help and troubleshooting information for your Matrox graphics hardware and software.
Product Information
Provides information on your Matrox GXM product, Matrox software versions, and hardware status.
This information is helpful when troubleshooting problems.
System Information
Provides your system information (such as your OS version, system model, and graphics chipset).
This information is helpful when troubleshooting problems.
Connections
Detect – Detects the number of monitors currently connected to your product.
Open Quick Setup – Helps you quickly set up your Matrox DualHead or TripleHead2Go
product.
Product Update
Reset to Manufacturer Settings – Restores the list of display modes to the manufacturer
default settings.
Update Firmware – Downloads and installs the latest firmware for your Matrox
DualHead or TripleHead2Go product.
Uninstall PowerDesk – Removes Matrox PowerDesk software from your system.
. You can change your current display setting by choosing a new
Apply
If you edited your display modes using the GXM Control Panel, make sure your
dialog box.
.
Undo Changes
on the toolbar, then choose
Matrox PowerDesk
.
Change Display Setting
Matrox GXM – User Guide (Mac version) 47
dialog box. If your new
Change Display